Different Ways To Fix iPhone Issue – iPhone Stuck On Apple Logo

Important: If these methods can’t work, then you should contact Apple customer service, or else visit an Apple Store for in-person support.

Method 1: Restart your iPhone

Many issues, including an iPhone stuck on the Apple logo, can be resolved with just a restart. However, a simple restart is an easy method to fix the issue in this case. But it is an easy solution that makes it worth trying. It just costs a few seconds of your time.

Procedure to restart iPhone XS(Max), XR, iPhone X, and 8 (Plus):

• Instantly hit and release the volume up button.
• Then hit and release the volume down button.
• At last, hit the side button and hold until the display turns off.
• Try to hold the side button and release it after the device returns back onto its Apple boot screen.

Procedure to Restart iPhone 7/7 Plus:

• Hit and hold the Sleep/Wake button along with the volume down button simultaneously for 10 seconds until the Apple logo appears.

Restart iPhone 6/6s/SE/5:

• Hit and hold the Home button.
• After holding the Home button, hit and hold the Sleep/Wake button.
• Try to hold both buttons for few seconds until the Apple logo appears.

Method 2: Solution to iPhone Stuck On Apple Logo Without Restoring

An alternative method of fixing this issue is with iMyFone Fixppo. It is an iOS repair tool that can backup your iPhone to normal from lots of issues. Such as Recovery mode, Apple logo, black/white screen, and much more.

There are so many reasons behind why anyone Fixppo is called the best iOS recovery tool.

• Resolve the Apple logo problem without losing data and also work for resolving Recovery mode, DFU mode, and many other 50+ software issues.
• Provide 2 recovery modes, which can 100% solve your iOS system issue.
• It is easy to operate. You don’t want any technical info.
• Support to resolve iPhone XS/XR/XS Max/X/8 (Plus)/7/6/6s/SE/5/4 issues.

Fix Issue Via iMyFone Fixppo:

Step 1:

Initially, you have to install the Fixppo on the PC and launch it. Then choose “Standard Mode” to start.

Step 2:

You will then connect the device. As your iPhone in the Apple logo, it’s likely your device might not be faulty. If so, just follow the steps showed on the interface to enter Recovery mode/DFU mode.

Step 3:

Another step is downloading the firmware online. Just decide which model of firmware to be installed or downloaded on your iPhone.

Step 4:

When the firmware is installed successfully, tap the “Start” button, and Fixppo will analyze the firmware info and use it to repair your Apple logo problem.

Method 3: Put the iPhone into Recovery Mode

Recovery Mode is a particular troubleshooting mode that helps you in this situation. When the issue occurs, it means that the OS is having trouble starting up. Recovery Mode boots up the mobile, but it stops the operating system from running so you can resolve it. After using Recovery Mode, you can just install a fresh model of iOS or recovery of your data. It’s quite an easy or simple technique that fixes the issue in some cases.

Restore iPhone via iTunes:

Step 1:

Initially, connect your iPhone to a PC then open iTunes software. For iPhone 6/5, just long-press the Sleep/Wake button or the Home button together. But for the users of the iPhone 7, modify the Home button to the Volume Down button. For iPhone 8/X/XS/XR, long-press the Volume Up and Volume Down button together.

Step 2:

Then release the Sleep/Wake button when the screen is black. Try to hold the home button until you view a popup message informing that your iPhone is detected in recovery mode and needed to be restored.

Step 3:

Next, tap on “Restore” and iTunes will immediately start to download or install the software to recover your iPhone from scratch.

Method 4: Use DFU Mode To Fix The Issue

DFU Mode stops your iPhone through the startup process and enables you to load a backup, restore the iPhone, or start fresh. It’s identical to Recovery Mode but can focus on fixing the kind of low-level issues that cause the iPhone to be stuck on the Apple logo. After using DFU Mode takes some practice as it needs a fixed set of actions, but it is quite effective.

How to:

Step 1:

At first, connect your phone to PC and launch the iTunes software. Then, For iPhone 5/6/7, long-press the Sleep/Wake button or the Home button together for a few seconds. For iPhone 8/X/XS, long-press the volume up and volume down button together.

Step 2:

Then release the Sleep/Wake button when the screen turns to black. Then try to hold the home button till the time a popup message from iTunes is shown confirming that your device is detected in recovery mode.

Step 3:

Then release the Sleep/Wake button when the screen turns to black. Try to hold the home button until you view a popup message informing that your phone is detected in recovery mode and needed to be backed up. After you view a completely black screen, then you are in DFU mode.

Step 4:

You can also follow the method “Recovery mode steps” above to restore your device via iTunes.

Conclusion:

Here are 4 best methods to fix iPhone stuck on Apple logo issue. However, we suggested you try the iMyFone Fixppo software as it can’t cause any data loss and can fix your issue within a few clicks. If you know any other method then let us know below. Stay tuned with us!

Till then! Stay Happy ?

Also Read:

• How to Fix if USB Ports not Working – Tutorial
• How To Fix iPhone Error ‘Could Not Activate Mobile Data Network’