Do you want to control the fan speed on Windows 10? Every computer or laptop has a built-in fan. You don’t need to high-end gaming rig or gaming laptop to have fans on your PC when they all heat up. Normally, the fans run quite faster once you boot up a PC and then quiet down when startup ends. They will begin executing again. Or executing faster once you begin using your PC’s resources more. For example, once you have lots of tabs simply open in Chrome.
Contents
How fans work to cool a PC
The fans know when to begins executing faster, and when to slow down. They have built-in sensors that monitor your PC temperature. However, once it reaches a certain target, they begin to spin to cool it down.
The laptop or your PC chassis are built so that air will flow out that is why make sure you can’t block the vents. If your computer continues to execute system heavy tasks. Also, the fans will run to stabilize the temperature.
The limits and temperature sensors set for them. Also, some fan speeds can’t accessible by users. This is due to some users can’t judge how hot their PC is. Or when it’s time to execute fans faster or slower. If your fans executing constantly, your computer is consuming more energy than it wants to and that will likely heat up the adapter. It’s an amazing balance that keeps a PC cool but not overheating it.
Control fan speed on Windows 10
To control the fan speed on Windows 10, you can simply do so at your own risk. Make sure that if your computer or laptop is too hot. Then you might permanently damage hardware to the point where it has to be replaced.
If you want to control fan speed, simply install a third-party app. The app depends on your hardware.
There are two apps we are discussing. Between the two, you simply find an app that can analyze your fans and enables you to change their speed.
Install the app and follow the steps below to control the fan speed on Windows 10.
How To Control fan speed on Windows 10 with SpeedFan
Step 1:
Initially, download or install SpeedFan and execute it.
Step 2:
On the app’s main window, tap the ‘Configure’ button.
Step 3:
Once configure a new window will open. Head over to the Fans tab.
Step 4:
Wait a while to find and list your fans.
Step 5:
Choose the fan you like to control.
Step 6:
Simply use the response curve just to control the speed of the fan.
Response curve
Fans enable when your PC heats up. However, the response curve maps heat using the fan speed. When the PC becomes hot the fan will run faster.
How To Control fan speed on Windows 10 with HWiNFo
Simply follow these steps to control the fan speed using HWiNFo.
Step 1:
Initially, launch the app and tap Sensors on the main window.
Step 2:
Now confirm the pop-up message.
Step 3:
Then a new window will open listing the different sensors on your PC. Under it, there is a fan button. Simply tap it.
Step 4:
Another new window will open listing 3 fans. Choose one of the active fans.
Step 5:
Tap ‘Set manual’ to manually set the speed for the fan.
HWiNFO can’t map the speed to the temperature of your system so you must be careful with it. Simply search a way to check the temperature of your CPU and GPU so that it doesn’t start heat up.
Conclusion:
Here’s all about “Control Fan Speed on Windows 10”. Is this article helpful? Dis you face any issue while controlling fan speed on Windows 10? Share your thoughts with us in the comment down the section below. Also, for further queries and questions let us know in the comment section below!
Till then! Peace Out ?
Also Read:
